Neilpryde Fly II PRO Wing

As a new 2024 model, this may be on a pre order or incoming delivery, so stock shown may be delayed or available to pre order. Contact us for more details.

FLY II PRO WING

3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5

The 2024 FLY II PRO is an innovative advancement of the first FLY edition from 2023. The shape has undergone revisions similar to those of the FLY II, but it has also been enhanced with premium materials to deliver exceptional performance and user experience.

From the original FLY, our goal was to enhance stability, stiffness, and improve handling and control. The FLY II PRO introduces Aluula Aeris X, featuring a +/-45° X weave as opposed to regular Aluula, with lightweight Aeris wingtips, resulting in significantly increased bias stiffness. This enables a thinner and stiffer Leading Edge (LE) than ever before. Additionally, since the materials are composed of a single polymer, they are ready for recycling.

In general the handle weight has been reduced, the FLY PRO now features even lighter carbon handles with black EVA without texture, for a clean and technical look.
The sizes are carefully chosen - the half square metre increments of the Fly Pro are optimum for the more 'pro‘ rider. From 3,5 to 6,5 - you can find your ideal premium NeilPryde wing.

KEY FEATURES - 

> High Quality Bladder with Anti-Twist system - Fixing the bladder in different spots in the tube prevents it from twisting and therefore protects it from breaking when inflating. It also makes changing the bladder super easy and long lasting shape control.

> Aluula Aeris X - In the front panels of Leading Edge and Middle Strut. The new ALUULA materials enable a thinner and stiffer Leading Edge and Middle Strut than ever before.

> Aluula Aeris - Lightweight wingtips in Leading Edge and Middle Strut. The new ALUULA materials enable a thinner and stiffer Leading Edge and Middle Strut than ever before.

> Carbon handles - Even lighter carbon handles with black EVA without texture, for a clean and technical look.

> Canopy Material - The trailing edge panels forward of the frame are made from Challenge Code 95 for exceptional stiffness and long lasting shape control. Transverse paneling holds shape under load and reduces stretch over time.

DEVELOPMENTS - 

A year after introducing the FLY, we have achieved additional development milestones and are proud to unveil the enhanced and refined models: FLY II PRO and FLY II. The development of the FLY concept has been based on using the most proven materials, examining the technical development of wingfoiling down to the smallest detail and adjusting all the set screws.

> Shape differences - The Fly II and Fly II PRO are very close. The major shape differences are the LE diameter (PRO is much smaller) and that - because it has a flatter entry angle to leverage the leading edge (LE) stiffness of the Aluula and reduce drag - the Fly PRO canopy appears slightly smaller when shown as flat pieces.

> Transverse Canopy Paneling - The new wings have much more precise shaping built in, while retaining the transverse paneling that holds it‘s shape under load and stretches much less over time. There are now 4 stitched transverse panels on each side of the wing compared to only 2 in the previous model, vastly increasing shape stability.

> Integral batten system - Sewn-in composite battens create a flat, fast trailing edge with minimum flutter.

> Staggered materials weights on LE - LE with ALUULA AERIS X materials for strength and durability and ALUULA AERIS for durable & ultralight wingtips.

> High lift concept - Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability.

FLY II PRO vs FLY II

SIZE RECOMMENDATIONS -