01202 700503CONTACT US

You have no items in your shopping cart.

NOTE: online exclusive - give us a call before buying to check stock times     Escape Carbon 530 The Escape foil is nothing less than a master piece of hydrodynamic...

NOTE: online exclusive - give us a call before buying to check stock times



Escape Carbon 530

The Escape foil is nothing less than a master piece of hydrodynamic refinement and composite craftmanship.

  • Amazing Glide & Speed
  • Control at high speed
  • Monobloc: 1 pc Carbon Construction


Area: 530 cm²
Span: 58 cm
Aspect Ratio: 6.3
Weight: 1,06 kg (wing only)

65% take off, 70% stability, 80% carving, 100% performance


Designed to foil at high speed with full control whatever the conditions, the Escape 530 offers enough performances to go racing but it’s “raison d’être” is first and foremost to provide the most exilherating ride on the water. Light or strong wind, racing or carving the Escape is a playful, nimble and enjoyable hydrofoil which delivers an amazing glide with a terrific speed potential and upmost control.

Such a level of performance is only possible through the use of a 1-piece monobloc construction where the entire plane (front wing, fuselage, stabilizer) is molded in one-shot out of pre-preg carbon with great craftmanship. The end result is a piece of carbon composite with the best possible strength and stiffness to make sure you are always in control.



> Pre-preg: with pre-preg fabrics, the carbon fibre is directly impregnated with epoxy resin by its manufacturer; this guarantees a perfect ratio between epoxy and carbon, and represents the highest quality process. 
Quality control is much better and so is the working environment for the people building our foils. Pre-preg fabrics offer the lightest weight with the best mechanical properties of carbon fibre. 

> Monobloc structure: having a stiff and solid assembly between all the parts of the foil, is key to making it perform at its best as well as easy to handle. 
The connection of the front wing with the fuselage is highly stressed and loaded, it is one of the critical areas of the assembly in terms of structure. 
The Monobloc wings are molded together with the fuselage in one shot, thereby removing the connection and the chances for unwanted and parasitic movements. 
The structural fibres of the fuselage are spread into the wing to achieve the most natural, sound and light connection. 
It is also incredibly stiff and provides absolute control at all times, with the foil responding perfectly to all of the riders' input.
When the overall dimensions are too large for convenient transportation, a connection is set into the fuselage, behind the mast where the loads are smaller. 

> Titan connection: enables a very stiff and direct connection between two parts, locking efficiently any movements in all directions. 
Its format is compact which is hydrodynamically friendly and very easy to use, assemble and disassemble. 



> Alu mast 45>95cm: F-One aluminium mast can be used for all disciplines; kite, surf, stand up paddle, wing and windsurf. The profile is extruded with precision from 6063 aluminium block. 
The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down.
It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.
The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).
A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
Recommended sizes

> Carbon mast 75>105cm: a true masterpiece of composite craftsmanship and design, the F-One carbon mast was designed to transform your foiling experience by a significant improvement of the glide and a dramatic weight reduction matched with impressive rigidity. 
Available in 75 cm, 85 cm and 105 cm, the F-ONE Carbon Mast is ready for all disciplines: surf, wing, kite, SUP. It features a 4-bolt plate at the top (hole spacing: 160×90mm) and an integrated Titan mast foot at the bottom. It can be connected to virtually all boards on the market featuring the twin track system and can receive all the wings and fuselage that feature the TITAN connection slot.
Chord: 12cm, Profile thickness: 1.45cm, Weight: 1.4kg, 1.52kg, 1.81kg
Recommended sizes
75>105 KITE FOIL


Note: purchase is of foil plane pack (front wing, stabiliser and fuselage) + mast choice (carbon masts include top plate and titan mast foot) (aluminium masts require titan mast foot + top plate - we add to package price) to create complete foil setup. 


If you wish to purchase additional/ and or separate components, please give us a call as this is possible on 01202 700503







    Customer Reviews

    Based on 1 review Write a review

    You can find everything you need to know about delivery and shipping by going to the 'delivery information' section under our terms and conditions

    Please get in touch if you are unsure... 01202 700 503
    Just added to your wishlist:
    My Wishlist
    You've just added this product to the cart:
    Go to cart page